Thecus N2200 User Manual download pdf (Page 18)

USB Copy

The USB Copy function enables you to copy files stored on USB devices such as USB

disks and digital cameras to the N2200 with a press of a button. To use USB copy,

follow the steps below:

1. Plug your USB device into an available USB port on the Front Panel.

2. Press the “USB Copy Button”.

3. The N2200 will start copying USB disks connected to the front USB port. The

LCD will display the USB copy progress and result.

Typical Setup Procedure

From the Web Administration Interface, you can begin to setup your N2200 for use

on your network. Setting up the N2200 typically follows the five steps outlined

below.

For more on how to use the Web Administration Interface, see

Chapter 4: Web Administration Interface.

Step 1: Network Setup

From the Web Administration Interface, you can configure the network settings of

the N2200 for your network. You can access the Network menu from the menu bar.

For details on how to configure your network settings, refer to

Chapter 4: System Network.

Step 2: RAID Creation

Next, administrators can configure their preferred RAID setting and build their RAID

volume. You can access RAID settings from the menu bar of the Web Administration

Interface by navigating to Storage Management > RAID Configuration.

For more information on configuring RAID, see

Chapter 4: System Management > RAID Configuration.

Don’t know which RAID level to use? Find out more about the different RAID levels

from Appendix C: RAID Basics.

Step 3: Create Local Users or Setup Authentication

Once the RAID is ready, you can begin to create local users for the N2200, or choose

to setup authentication protocols.

For more on managing users, go to Chapter 4: User and Group Authentication.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 94 95

No comments

Thecus N2200 User Manual Page 18