Thecus N2200 User Manual download pdf (Page 14)

Chapter 3: First Time Setup

Overview

Once the hardware is installed, physically connected to your network, and powered

on, you can configure the N2200 so that it is accessible to your network users. There

is one way to set up your N2200: using the Thecus Smart Utility. Follow the steps

below for initial software setup.

Thecus Smart Utility

The handy Thecus Smart Utility makes configuring N2200 a snap. To configure the

N2200 using the Smart Utility, perform the following steps:

1. Insert the installation CD into your CD-ROM drive (the host PC must be

connected to the network).

2. The Smart Utility should launch automatically. If not, please browse your

CD-ROM drive and double click on autorun.exe. Click “N2200”.

3. Select the N2200 that you like to configure. Press Next to continue.

4. First, please select System Installation Wizard.

NOTE

For MAC OS X users, double click on Thecus Smart Utility Wizard .pkg file.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 94 95

No comments

Thecus N2200 User Manual Page 14