Thecus N2200 User Manual download pdf (Page 40)

Disks Information

Item Description

Disk No. Indicates disk location.

Capacity Shows the SATA hard disk capacity.

Model Displays the SATA hard disk model name.

Firmware Shows the SATA hard disk firmware version.

Status Indicates the status of the disk. Can read OK, Warning, or

Failed.

Bad Block Scan Click Yet to start to begin scanning for bad blocks.

Total Capacity Shows the total SATA hard disk capacity.

Disk Power

Management

The administrator can set the disk to power down after a period of

inactivity.

S.M.A.R.T. Information

On the Disks Information screen, the

status of each disk will be displayed in the

Status column. Clicking on an OK or

Warning link will display the S.M.A.R.T

Information window for that particular disk.

You may also perform disk SMART test,

simply to click “Test” to start with. The result

is only for reference and system will not take

any action from its result.

S.M.A.R.T. Information

Item Description

Tray Number Tray the hard disk is installed in.

Model Model name of the installed hard disk.

Power ON Hours Count of hours in power-on state. The raw value of this attribute

NOTE

When the Status shows Warning, it usually means there are bad sectors on the

hard disk. It is shown only as a precaution and you should consider changing the

drives.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 94 95

No comments

Thecus N2200 User Manual Page 40