Thecus N2200XXX User Manual download pdf (Page 69)

69

WAN/LAN1 Configuration

Item Description

Host name Host name that identifies the Thecus IP storage on the network.

Domain name Specifies the domain name of Thecus IP storage.

WINS Server To set a server name for NetBIOS computer.

MAC Address MAC address of the network interface.

Jumbo Frame Support Enable or disable Jumbo Frame Support of the WAN/LAN1 interface on your

Thecus IP storage.

IP Sharing Mode When enabled, PCs connected to the LAN2 port will be able to access the

WAN/LAN1.

Link Aggregation Specifies whether WAN/LAN1 and LAN2 ports will be aggregated and act as

one port. There are 6 modes can be choose from:

Load Balance/Fail-over/Balance-XOR/802.3ad/Balance-TLB/Balance-ALB

Set IP Address by:

Static / Dynamic

You can choose a static IP or Dynamic IP, and input your network

configuration

IP IP address of the WAN/LAN1 interface.

Netmask Network mask, which is generally: 255.255.255.0

Gateway Default Gateway IP address.

DNS Server Domain Name Service (DNS) server IP address.

NOTE

• Only use Jumbo Frame settings when operating in a Gigabit environment

where all other clients have Jumbo Frame Setting enabled.

• Enabling DHCP automatically turns on UPnP— see the Service Support Screen.

• If you are only using the WAN/LAN1 port, we suggest that you disable IP

Sharing Mode. This will result in higher throughput.

• A correct DNS setting is vital to networks services, such as SMTP and NTP.

• To use the Link Aggregation with “802.3ad selected” feature, please make sure

the networking equipment on the other end of Ethernet cable also supports

802.3ad protocol.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 189 190

Comments to this Manuals

No comments