Thecus N2200XXX User Manual download pdf (Page 62)

62

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade

screen appears.

Follow the steps below to upgrade your firmware:

1. Use the Browse button to find the firmware file.

2. Press Apply.

3. The beeper beeps and the Busy LED blinks until the upgrade is complete.

Schedule Power On/Off

Using the Thecus IP storage System Management, you can save energy and money

by scheduling the Thecus IP storage to turn itself on and off during certain times of

the day.

From the menu, choose the Schedule Power On/Off item and the Schedule

Power On/Off screen appears.

To designate a schedule for the Thecus IP storage to turn on and off, first enable the

feature by checking the Enable Schedule Power On/Off checkbox.

Then, simply choose an on and off time for each day of the week that you would like

to designate a schedule by using the various dropdowns.

Finally, click Apply to save your changes.

NOTE

• The beeper only beeps if it is enabled in the System Notification menu.

• Check Thecus website for the latest firmware release and release notes.

• Downgrading firmware is not permitted.

WARNING

Do not turns off the system during the firmware upgrade process.

This will lead to a catastrophic result that may render the system inoperable.

NOTE

•Save old firmware images and system configuration files before upgrading firmware in

case the system needs it later on. The backup files can will be stored on a USB disk if

available or in the nsync folder on your RAID partition. The backup will take

approximately 3-5 minutes to complete before carrying on with the firmware upgrade.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 189 190

Comments to this Manuals

No comments