Thecus N5500 User Manual download pdf (Page 41)

DHCP Server Configuration

A DHCP server can be configured to assign IP addresses to devices connected to the

LAN port. To configure these ports, choose LAN from the System Network menu.

DHCP Configuration

Item Description

DHCP Server Enable or disable the DHCP server to automatically assign IP

address to PCs connected to the LAN interface.

Start IP Specifies the starting IP address of the DHCP range.

End IP Specifies the ending IP address of the DHCP range.

DNS Server Displayed the DNS server IP address.

The IP Segment of WAN and LAN should not overlap.

NOTE

The IP address of the LAN interface should not be in the range of the Start

IP address and End IP address.

WARNING

Samba / CIFS

There are 4 options is currently allow Admin to Enable/Disable to operate N5500

associated with Samba / CIFS protocol. With the option changed, it will need to

reboot system to activate.

Samba Service

Used for letting the operating system of UNIX series and SMB/CIFS of Microsoft

Windows operating system (Server Message Block / Common Internet File

System).Do the link in network protocol. Enable or Disable SMB/CIFS protocol for

Windows, Apple, Unix drive mapping.

File Access Cache

File Access Cache is default Enable. This option will help to increase the

performance while single client access share folder in writing under SMB/CIFS

protocol.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 148 149

No comments

Thecus N5500 User Manual Page 41