Thecus 6TB M3800 HDMI 1080P User Manual download pdf (Page 14)

Chapter 3: First Time Setup

Overview

Once the hardware is installed, physically connected to your network, and

powered on, you can configure the M3800 so that it is accessible to your network

users. Follow the steps below for initial software setup.

Thecus Setup Wizard

The handy Thecus Setup Wizard makes configuring M3800 a snap. To configure

the M3800 using the Setup Wizard, perform the following steps:

1. Insert the installation CD into your CD-ROM drive (the host PC must be

connected to the network).

2. The Setup Wizard should launch automatically. If not, please browse your

CD-ROM drive and double click on Setup.exe.

NOTE

For MAC OS X users, double click on Thecus Setup Wizard 1.

1.99.dmg

3. The Setup Wizard will start and automatically detect all Thecus storage

devices on your network. If none are found, please check your connection

and refer to Chapter 8: Troubleshooting for assistance.

4. Select the M3800 that you like to configure. Press Next to continue.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 103 104

No comments

Thecus 6TB M3800 HDMI 1080P User Manual Page 14