Thecus N2200EVO User Manual download pdf (Page 27)

Chapter 3: First Time Setup

Once the hardware is installed, physically connected to your network, and powered

on, you can configure the Thecus IP storage so that it is accessible to your network

users. There is one way to set up your Thecus IP storage: using the Thecus Smart

Utility(N2200/N0204) /Thecus Setup Wizard(N2200Plus/EVO,N4100EVO).

Follow the steps below for initial software setup.

Thecus Smart Utility (N0204/N2200)

The handy Thecus Smart Utility makes configuring N0204/N2200 a snap. To

configure the Thecus IP storage using the Smart Utility, perform the following steps:

1. Insert the installation CD into your CD-ROM drive (the host PC must be

connected to the network).

2. The Smart Utility should launch automatically. If not, please browse your

CD-ROM drive and double click on autorun.exe. Click “N0204/N2200 ”.

3. Select the N0204/N2200 that you like to configure. Press Next to continue.

4. First, please select System Installation Wizard.

NOTE

For MAC OS X users, double click on Thecus Smart Utility Wizard .pkg file.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 117 118

No comments

Thecus N2200EVO User Manual Page 27